OUR VISION
It is the vision of Canfield Connector to meet the challenges of customers seeking innovative solutions to interconnection, interface, sensing and control of pneumatic, electro-pneumatic and electronic devices used in equipment and machinery.

OUR MISION
Canfield will provide world class service and products in an ongoing commitment to excellence.
Canfield Connector's mission is to utilize the highest quality, progressive technologies to produce world class electro-pneumatic, electronic, interface, sensing and control devices. Canfield will seek out applications, and use the highest quality standards to design, manufacture and test every product shipped to our customers.

 

 

Solenoid Valve Connectors

Solenoid Valve Connectors

Canfield Connector produces a complete line of solenoid valve connectors and accessories to meet the DIN 43650 Form A, Form B, Form C, UL, CSA and ISO 4400 (EN 175301-803) industry standards in Mini, ISO and Sub-Micro. We offer PG9, PG11, molded in wire and 1/2" conduit wire connections. Designed and made in the USA, these connectors are used to connect the solenoid operators of pneumatic and hydraulic solenoid valves to electronic controls.


Strain Relief Cord Grips

Strain Relief Cord Grips

The Canfield Connector CanTop (brand) is a series of wire bulkhead feed through connectors which have integrated wire strain relief and sealing mechanism. The CanTops are made from rugged engineered materials which are impervious to dust and moisture. Available in Nickel Plated Brass Strain Relief, Nylon Strain Relief, and Nylon Flex Strain Relief versions with various NPT, PG, and metric thread sizes.

Cylinder Proximity Sensors

Cylinder Proximity Sensors

Magnetic Proximity Sensors designed to fit on 9/16 inch up to 8 inch NFPA type linear actuators that sense position of a magnetic piston along the cylinder travel and send an electrical signal to a controller. Canfield was first with a self-adjusting clamp style that forces the switch onto the cylinder wall, regardless of actuator diameter. Available in either reed or electronic sensing styles, the sensors are fully encapsulated for IP 67 service.


Differential Pressure Sensors

Differential Pressure Sensors

Canfield Connector EOS is a tactile sensor that turns a standard linear actuator into a moving sensor that not only does the work needed but also assures that the proper forces have been applied to the work piece.

New Products

M8 & M12 Round Connectors

M8 & M12 Round Connectors

Canfield Connector Euro-style solenoid and sensor round B-type M8 connectors feature metric locking are used for factory automation, commercial electronics, process control, and industrial instrumentation. Canfield Connectors have industry-standard A-coding and have locking ring to ensure the best connection.

Canfield Connector Euro-style solenoid and sensor round B-type M12 connectors feature metric locking are used for factory automation, commercial electronics, process control, and industrial instrumentation.


 

Conveyor Controls

Conveyor Controls

Canfield Connector Optical Sensor Valves are an all in one piece solution to zero pressure photo-eye conveyor control. Featuring an all solid state sensor using infrared polarized light that cannot be falsed coupled with low cost daisy chain style quick connect wiring and a long life three way solenoid valve for puck control. The product is offered in Retro-Reflective or diffused Accumulation.


 

Timers and Electronics

Timers and Electronics

Canfield Connector produces a full line of solid state connector and module timers as well as Proportional electronic controllers and Latching, and solenoid driving modules. Our solid state devices feature very specific enclosures, in a DIN 43650 Form A and Form B (industry standard) and in a fully encapsulated block module styles. The DIN 43650 enclosures act as self-contained electronic circuits in NEMA 4 packages that can be quickly mounted onto valves using the DIN 43650 ISO 4400 EN 175301-803 standards. Our time delay relay electronic module package is designed to be incorporated into an enclosure alongside other controls. Our all digital microprocessor based timers feature 5 to 240 VAC 50/60Hz with many broad and diverse logic packages, interval, on-delay, off delay, triggered one-shots and recycling timers. Canfield Connector proportional controls save money as they are designed to replace full blown controllers with the most used options. Our electronic modules are all produce in the USA using the best possible components.

Proportional Solenoid Drivers

Proportional Solenoid Drivers

Canfield Proportional Drivers are proportional electronic controls in either a DIN 43650 form A housing or block styles that are meant to control the basic functions of a proportional hydraulic valve in a miniaturized environmentally resistant package.

A Micro Proportional Driver provides accurate control of hydraulic and pneumatic proportional solenoid valves used in mobile construction equipment
and industrial processes. The MPD can control the flow of air or liquid linearly at a setting from 0.10-20 seconds. One example of use would be in a
paint system. The MPD allows a solenoid to oscillate, significantly reducing system shock and wear commonly found in non-oscillation digital valve systems.
The Canfield Connector Series B5950 is a rugged proportional driver built into an epoxy potted enclosure designed to control linear proportional solenoid operators. Features include selectable control signal inputs from 0-5V or 0-20 mA with adjustable min/max current output.


CFA Contact Information

  • emailEmail
    sales@gocfa.com
    marketing@gocfa.com
  • phonePhone
    800-323-3164 (toll free)
    508-802-6005
    508-8026006 (fax)
  • addressAddress
    Controls For Automation, Inc.
    25 Constitution Drive, Taunton,MA 02780
  • Our business hours:
    Monday - Friday: 8:00am - 5:00pm (EST)

Visit CANFIELD CONNECTOR official website:
http://www.canfieldconnector.com