Cable-Trol ® (Rodless Cable Cylinders)
Cable-Trol ® Rodless Cylinders offer a cost effective solution compared to
other rodless cylinders types. Cable cylinders provide the same stroke as
conventional rod cylinders with about 50% SPACE SAVINGS. As the piston
is pushed in one direction, the load is pulled in the opposite direction within
the length of the cylinder. Effective piston area is greater than in conventional
rod cylinders and there is equal force in both directions. Our cable cylinders
work in a variety of Applications such as remote location, rotary motion and
around corners.
Cable cylinders can be configured to a variety of positions and ports along
with a wide selection of Accessories including Automatic Tensioners, Flange
Mounts, H-Trolley's, Reed Switches, Magnetic Pistons, Cable Wipers and More.
Trac-Trol ® (Guided Cable Cylinders)
Trac-Trol ® Guided Linear Actuators are ideal when an application requires
a load bearing system to be self guided and self supported. As the piston is
pushed in one direction, the load is pulled in the opposite direction within the
length of the cylinder. Effective piston area is greater that i conventional red
cylinders and there is equal force in both directions.
Guided linear actuators, also called guide cable cylinders, can be configured
to a variety of positions and ports along with a wide selection of Accessories
including Automatic Tensioners, Reed Switches, Shock Absorbers, Stainless
Steel Guide Rods, Rulon Bearings and More.
Powr-Tube ® (Short Stroke Linear Actuator)
POWR-TUBE ® provides a unique construction of a non-removable end
fitting bonded to a tube (up to almost 100 ft. length) to give a leak proof,
long-lasting, low-cost, short-stroke linear actuator. Pneumatic or hydraulic
service.
• Light Weight
• Simple Construction, Easy to Mount
• Low Cost
• NO Maintenance
TEMP. RATING: 180°
MAXIMUM OPERATING PRESSURE 100 PSI
Air Oil Tank
Greenco's new air over oil tank is the ideal answer for your power
requirements where a smooth, even hydraulic action is required.
This lightweight, compact unit is easily installed on any existing or
new application. Years of worry-free, inexpensive operation are
virtually guaranteed, because there are no moving parts.
