PNEUMATIC, ELECTRIC, ANGULAR & PARALLEL GRIPPERS

aventics
Full Line Pneumatic Components

AVENTICS



camozzi
Full Line Pneumatic Components

CAMOZZI



ckd
Full Line Pneumatic Components

CKD



compact automation
Space Saving Actuators, Grippers

COMPACT



metal work pneumatics
Full Line Pneumatic Components

METAL WORK PNEUMATIC USA



spacer
ADDITIONAL RESOURCES
AVENTICS
UPG series Gripper

  • Sturdy T-slot guidance for the precise handling of different workpieces
  • Compact dimensions and low weight for minimal interfering contours in handling
  • High maximum moments possible suitable for using long gripper fingers
  • Wedge-hook design for high power transmission and synchronized gripping
  • SC4 Sensor Series for monitoring the end-position
  • Mounting from two gripper sides for universal and flexible gripper assembly
  • Air supply via hose-free direct connection or screw connections for flexible pressure supply in all automated systems
  • For tasks requiring a high gripping force: pneumatically controlled mechanical grippers

    Whether round or angular, super light or heavy, with irregular shapes and difficult materials – the types and versions of parts and workpieces to be moved are many. As versatile as the gripping tasks may be, AVENTICS has the right solution for every automated handling requirement.

    Graduated range of grippers for many standard applications

    Our pneumatically controlled mechanical grippers are 2-finger parallel grippers characterized by their high gripping forces, precision, and exact movement of the clamping jaws. They can be selected based on the application requirements and flexibly equipped with object-specific gripper fingers.

    CAMOZZI
    Angular Grippers
  • Series CGA angular grippers
  • Series CGSN 180° angular grippers

  • Parallel Grippers
  • Series CGP parallel grippers
  • Series CGPT self-centering parallel grippers with T-guide
  • Series CGPS self-centering parallel grippers with double ball bearing guide
  • Series CGLN wide opening parallel grippers

  • Centreing Grippers
  • Series CGC 3-Finger centric grippers

  • Sprue Grippers
  • Series RPGA sprue grippers Size 20mm
  • Series RPGB sprue grippers Size 8, 12mm

  • CKD
    FH500 Series - Feather hand (min-fulcrum hand) Double acting/single acting gripper
    HBL Series - Fulcrum hand Double acting/single acting gripper"
    HDL Series - Wide angle hand Double acting/single acting
    HJL Series - Toggle hand
    HMD Series - Thin wide angle hand
    BHE Series - Centering Hand
    BHA Series - Compact cross roller parallel hand Double acting/single acting gripper
    BHG Series - Compact cross roller parallel hand with rubber cover Double acting/single acting gripper
    BSA2 Series - Miniature cross roller parallel hand Double acting/single acting gripper
    FH100 Series - Feather hand (mini-parallel hand) Double acting/single acting gripper
    HAP1C Series - Parallel hand Double acting/single acting gripper
    HAP2 Series - Parallel hand Double acting/single acting gripper
    HCP Series - Lateral parallel hand Double acting gripper
    HEP Series - Bearing parallel hand Double acting/single acting gripper
    HGP Series - Long stroke parallel hand, double acting / single acting gripper
    HLB Series - Thin parallel hand (bush/bearing guide) Double acting gripper
    HLBG Series - Thin parallel hand with rubber cover (bush type/bearing type) Double acting gripper
    HLC Series - Thin type long stroke parallel hand Double acting gripper
    HMF Series - Compact wide parallel hand gripper (standard, long stroke)
    HMFB Series - LM guided large wide parallel hand gripper (Long stroke 1, long stroke 2)
    COMPACT AUTOMATION

    Angular motion grippers represent the lowest cost design. The air cylinder is an integral component of the overall gripper length. The piston actuator pushes the cam, or yoke, forward, rocking/pivoting the jaws open. The pull stroke closes the jaws. A four way valve circuit is required for control. Both two and three jaw designs are offered. Available in round and square body styles.

    Com-Pick grippers are designed for use in industrial applications such as robotics, pick-n-place, automatedassembly, and manipulator/tooling. All units feature aself-contained, double-acting actuator. Grippers can be mounted to any manufacturer’s robot, manipulator oractuator by way of an adapter flange. Low unit weight, high output and compact size are features of all models. Special materials, tooling, and adapter flanges are available upon request. Seal options, jaw options, sensor options, etc., can be easily added at assembly for prompt delivery of all variations. Angular motion grippers represent the lowest cost design. The air cylinder is an integral component of the overall gripper length. The piston actuator pushes the cam, or yoke, forward, rocking/pivoting the jaws open. The pull stroke closes the jaws. A four-way valve circuit is required for control. Both two and three jaw designs are offered. Round and square body styles are standard.

    Parallel motion grippers represent a highly versatile and flexible design. The integral pneumatic cylinder pushes the jaws open. The jaws slide along two hardened guide rods providing rigid, long lasting true parallel motion. The pull stroke closes the jaws. A four-way valve circuit is required for control. All units are of two jaw design

    Com-Pick II grippers are designed for use in industrial applications such as robotics, pick-n-place, automated assembly, and manipulator/tooling. All units feature a self-contained, double-acting actuator. “Generic” grippers can be mounted to any manufacturer’s robot, manipulator or actuator by way of an adapter flange. Low unit weight, high output and compact size are features of all models. Special materials, tooling, and adapter flanges are available upon request. Seal options, jaw options, sensor options, etc., can be easily added at assembly for prompt delivery of all variations. Parallel motion grippers represent a highly versatile and flexible design. The integral pneumatic cylinder pushes the jaws open. The jaws slide along two hardened guide rods providing rigid, long lasting true parallel motion. The pull stroke closes the jaws. A four-way valve circuit is required for control.

    The Compact® magnetic gripper is great for picking up ferromagnetic materials such as iron or steel in applications where other types of grippers and vacuum cups are currently being utilized. Our four new models with grip forces from 20 to 130 lbs. are now available. The new magnetic grippers from Compact® provide safe operation since the gripper will continue to hold the workpiece even with the loss of pneumatic pressure. Ideal for pick-and-place type systems or applications such as robotic end-of-arm tooling, conveyors, feeders, separators or where any precise positioning of goods or materials is required in the automation process.

    Applications

  • Conveyors
  • Feeders
  • Separators
  • Robotic End-of-Arm Tooling
  • Any application requiring the positioning of ferrous materials or goods
  • METAL WORK PNEUMATIC USA

    Reckoned in the industry as an eminent manufacturer, supplier and exporter, we are engaged in offering a wide range of Pneumatic Grippers. To cater to the diverse requirements of customers in efficient manner, we manufacture these grippers in different in different grades and dimensions. Offering at industry leading prices, these grippers are widely demanded by our customers.

    Features:

  • High torque resistance capacity
  • Corrosion resistance
  • Minimal maintenance
  • Specifications:

  • Operating pressure: 1.5÷7 bar [0.15 to 0.7 mpa]
  • Temperature range: 5 to 60 °C
  • Single stroke jaw: From 2 to 7 mm
  • Grippers with two parallel jaws with rollers
  • Clamping force: At 6 bars from 5.3 to 180 N
  • With the aid of modern machinery and technology, we have been able to manufacture, supply, import and export a commendable range of Pneumatic Parallel Grippers. To manufacture these grippers, we make use of optimum-grade materials and basic components that are obtained from reliable vendors of the industry. Technically accurate in nature, these grippers can be customized as per the demands of customers.

    Features:

  • Lightweight
  • High strength
  • Compact design
  • Specifications:

  • Grippers with two parallel jaws
  • Clamping force: At 6 bars from 180 to 420 N
  • Operating pressure: 2÷8 bar [0.2 to 0.8 mpa]
  • Temperature range: 5÷70 °C
  • Single stroke jaw: From 5 to 6.5 mm
  • Metal Work Pneumatic is well-known in the market for manufacturing, supplying and exporting Pneumatic Grippers Series. Developed with utmost accuracy, these products are manufactured using optimum-grade raw materials and components that are sourced from authentic vendors of the industry. Moreover, dispatching these products to the customers' premises in committed time-period, we have gained maximum client contentment.

    Features:

  • Longer service life
  • Compact design
  • Corrosion resistance
  • Specifications:

  • Operating pressure: 1÷10 bar (0.1÷0.8 mpa)
  • Temperature range: 5 ÷ 70 °C
  • Clamping force: At 6 bar from 30 a 225 N
  • Opening angle: 24 ÷ 41°