HOSE & TUBING
ADDITIONAL RESOURCES
COILHOSE
Nylon (PA) Tubing
Nylon tubing is a best known for its high pressure rating and broad temperature range. Coilhose Pneumatics Nylon Tubing is extruded from high quality resin to close tolerances.
Polyurethane (PU) Tubing
Coilhose Pneumatics’ Polyurethane is extruded from high quality ether-based resin. This means that the tubing will not degrade over time when exposed to water. Polyurethane tubing offers increased flexibility, resistance to kinking and a broad temperature range. All our polyurethane tubing is 95A durometer and can be used with either push-to-connect fittings or hose barbs.
Bonded Polyurethane (PU)
Bonded Polyurethane Tubing or Multi-Color Ribbon (MCR) provides a cost effective method of routing two or more lines in a single run. MCR enable rapid identification of tubes for identification, tracing or troubleshooting. Constructed of 95A polyurethane, MCR can be installed faster than other jacketing options. MCR will withstand the rigors of flexing, yet can be easily separated for routing by simply pulling sections apart. Compatible with push to connect or hose barb fittings.
Polyethylene (PE) Tubing
Polyethylene is one of the most popular choices for low pressure tubing due to its resistance to most chemicals and solvents, good flexibility and economical cost. Our polyethylene tubing is extruded from high quality resin to close tolerances. Compatible with Coilock Push-to-Connect and Poly-Tube Fittings.
Polyvinyl (PVC) Tubing
PVC Tubing is clear, lightweight and non-toxic tubing that offers more flexibility than nylon or polyurethane. PVC tubing offers resistance to most chemicals and solvents and is able to be sterilized repeatedly. Our PVC Tubing complies with government regulations for hospitals and food processing (FDA Standards). Used in chemical, industrial, laboratory, medical, food and beverage industries. For use with barb fittings. Coilock Push-to-Connect fittings are not recommended.
Weld Spatter Tubing
Nylon tubing is a best known for its high pressure rating and broad temperature range. Coilhose Pneumatics Nylon Tubing is extruded from high quality resin to close tolerances.
Nylon (PA) Tubing
Weld Spatter Tubing is specially designed to operate in environments where sparks from welding and cutting are present. The unique jacket design protects the 95A Polyurethane core from damage, but will still ignite if exposed to flames.
D.O.T. Tubing
Nylon 11 D.O.T. tubing is Type A, Non-Reinforced. This tubing is ideal for connecting instrumentation and accessories to air brake systems.
Tube Channels
Tube Channels provide installers with a simple way of organizing and securing plastic tubing. When tube channels are used, future troubleshooting and repairs are conducted in an easier fashion.
Flexeel®
Flexeel® Hose is a Lightweight Alternative to Bulky Rubber Hose
Flexeel Max®
Flexeel Max® expands upon the performance of Flexeel® Reinforced Polyurethane Hose with additional features.
Yellow Belly®
Yellow Belly® Hybrid PVC Air Hose Lies Flat and Maintains Flexibility in a Broad Temperature Range
Heavy Duty Neoprene Hose
A Tough, Heavy-Duty Hose that is Oil Resistant
General Purpose Rubber Hose
General Purpose Rubber Hose
Water Hose
Coilhose Pneumatics Manufactures Water Hoses and Accessories
Gilaflex®Gilaflex®
Gilaflex® is a Reinforced PVC Air Hose with a High Working Pressure
Thermoplastic Hose
Thermoplastic Hose is a PVC based hose that provides an Increased Working Pressure and Oil Resistance
Lock-On Series
The Lock-On Series of hose does not require clamps or ferrules.
Flexflow®
Flexflow® is optimal for Lubrication and Cooling Applications
Flexeel® Reinforced Polyurethane Coil
Flexeel® Reinforced Polyurethane Coils Are a Premium Self-Storing Coil
Flexcoil® Polyurethane Hose
Flexcoil® Polyurethane Coils are Durable, Lightweight Self-Storing Hoses for Demanding Applications
Nylon HoseNylon Hose
Nylon Self-Storing Coils Extruded from Nylon 12 and with High Retraction Force
Stowaway™ Coil
Stowaway™ Coils Feature a Heavier Wall Thickness that Increases Working Pressure and Provides Extra Protection
Twin Bond Nylon Coils
Twin Bonded Nylon Coils provide two paths for transferring air or fluids
Ball Swivel Lead-Ins
Ball Swivel Lead-Ins provide both the vibration isolation of a lead-in, and the increased range of motion from a ball swivel fitting.
Coiled Pigtails
The "Curly®" was developed as a unique coiled lead-in that provides a lightweight, ergonomic solution to prolong coupler life and increase comfort.
Durawhip®
The Durawhip® was designed to be installed on a jackhammer as a lightweight whip hose.
Pigtail Assemblies
Coilhose Pneumatics offers whips in several configurations designed to prolong coupler life and reduce fatigue.
FREELINWADE
If Inflexibility, cracks, and punctures have ever plagued your tubing, then it’s time for you to switch to polyurethane. PUR tubing provides excellent flexibility and resists the kinds of damage that can lead to dangerous leaks. Freelin-Wade offers highly versatile PU tubing in a range of sizes, configurations and hardness levels. No matter what your application, we have the right polyurethane tubing for your needs. Our inventory of PUR tubing includes an array of styles, including:
Fre-Thane® Polyurethane Tubing
Our Fre-Thane® PU tubing is available in a wide variety of colors, sizes and hardness values. The hardness value of PUR tubing is measured by the plastics resistance to indentation. Fre-Thane® tubing is measured on the Shore® A scale, which is used for harder plastics. The higher the number on the scale, the harder the plastic is for that product. For example, our Fre-Thane® 95A tubing is harder and more durable than our Fre-Thane® 90A tubing.
Ester-based vs. Ether-based Polyurethane Tubing
From the user’s standpoint, ester-based polyurethane tubing is less expensive and provides slightly better fuel and oil resistance; however, it degrades more quickly when exposed to moisture. On the other hand, ether-based tubing also resists fungus growth and it also reduces the chances of deterioration due to contamination or brittleness. Chemically, both ester-based polyurethane tubing and ether-based Fre-Thane® tubing are made from different polyol alcohols that cause similar, but different, reactions in the isocyanate. Both products are commonly found throughout the industrial marketplace.
Polyurethane Tubing Product Types
If inflexibility, cracks, and punctures have ever plagued your tubing, then it’s time for you to switch to polyurethane. PUR tubing provides excellent flexibility and resists the kinds of damage that can lead to dangerous leaks. Freelin-Wade offers highly versatile PU tubing in a range of sizes, configurations and hardness levels. No matter what your application, we have the right polyurethane tubing for your needs.
Fre-Thane® PU Tubing Features & Benefits
Freelin-Wade's PUR tubing exhibits a high resistance to abrasion, while being highly flexible and kink resistant. Fre-Thane® will stretch and flex but always return to its original shape; that’s the “memory” that makes our PU tubing extra special.
Nylon tubing, also known as polyamide tubing, can withstand higher temperatures and pressures than many other tubing options. It is often used as a substitute for metal because it is lightweight and corrosion resistant. This tubing is made from nylon, a polymer plastic made from repeating chains of amide groups that are bonded together to form fibers. Nylon 11 tubing is a unique kind of tubing made from polyamide 11. This material is known for its outstanding chemical, abrasion, impact, and moisture resistance and dimensional stability. Nylon 11 is used in industries ranging from food processing to auto manufacturing to robotics. Because it’s resistant to moisture absorption, Freelin-Wade’s nylon tubing is more corrosion resistant than other types of nylon tubing. It is heat and UV stabilized, making it resistant to stress-cracking, and so is ideal for use in outdoor applications with constant sun exposure. When compared to other nylon resins, our nylon tubing is also highly chemical resistant.
Standard Nylon Tubing
We offer nylon tubing in a variety of stock sizes and colors, as well as custom nylon tubing such as coiling (see below), bonding of multiple tubes, cut-to-length, custom printing, and other options are available to meet your specific needs.
Nylon D.O.T. Tubing
Freelin-Wade’s nylon DOT tubing is specially designed for use as airbrake tubing in heavy duty vehicles. Our Type A DOT tubing meets SAE J844 specifications and is available in a range of sizes and colors to meet your needs.
Nylon 11 High Pressure Tubing
For using with high working pressures (up to 800psi), we offer special High-Pressure Nylon 11 tubing. Made from a special semi-rigid compound, this nylon tubing exhibits outstanding tensile strength while maintaining its flexibility.
Super Soft Nylon 11 Tubing
Our Super Soft Nylon 11 tubing is formulated with a special compound that makes it even more flexible than our standard nylon tubing, without sacrificing other beneficial properties. Super Soft Nylon 11 tubes are ideal for using where media and environmental conditions make polyurethane impractical.
Nylon Tube Mini Coils
With 2” integral pigtails on each end, our nylon tubing mini coils can be used with push-to-connect or standard compression fittings. Small coil diameters make this tubing easy to handle. It is ideal for use with small pneumatic tools and in robotics.
Coiled Nylon Tubing
In addition to the large variety of standard nylon plastic tubing options we offer, Freelin-Wade also produces custom high-pressure nylon tubing that is tailored to your unique specifications. Sizes, colors, custom printing with any lettering or numbering you need, cut-to-length, and other options are available to give you the perfect high-pressure nylon tubing for your application.
Polyethylene tubing is flexible, lightweight, durable, and corrosion resistant. Polyethylene tubing, also known as poly tubing or PE tubing, is an effective solution for a wide range of liquid, gas, and fluid transfer applications. PE tubing is FDA approved for food and beverage applications. Freelin-Wade offers linear low density polyethylene (LLDPE) tubing, as well as our proprietary, extra-flexible Liquiflex POE polyethylene tubing.
LLDPE Tubing - Linear Low Density Polyethylene
One of polyethylene’s best features is its low cost; however, a low-cost tube often means a short lifespan. That’s why, many years ago, Freelin-Wade made the decision to only extrude our tubing from higher-grade, longer-lasting LLDPE (linear low density polyethylene). LLDPE tubing’s greatest advantage over standard low density polyethylene (LDPE) is its superior environmental crack resistance, or ESCR. Environmental stresses that can affect the longevity of LDPE tubing include chemical exposure, aging, connection to barb-type fittings, and high-vibration connections with compression fittings. Our LLDPE tubing can withstand 500-plus hours of exposure to IGEPAL solution, per ASTM D-1693 ESCR tests. LLDPE tubing also resists cracking when used with compression or push-to-connect fittings. All colors of Freelin-Wade LLDPE tubing comply with FDA regulation 21 CFR 177.1520(c) for food contact.
Liquiflex-POE Tubing
Freelin-Wade has developed a new polyolefin elastomer tube, called Liquiflex, that is ideal for conveying liquids and fluids in low-pressure applications. It provides all the chemical resistant properties of LLDPE tubing, and offers even greater flexibility than polyurethane. Liquiflex offers both of these outstanding properties in a single tube. Liquiflex is made from a polyolefin elastomer (POE) resin that comes from the same family of polymers as polyethylene and polypropylene. Like these other olefins, it is resistant to solvents and chemically inert; unlike those resins, it is an elastomer, making it highly elastic. If you bend it, kink it, or crush it, Liquiflex POE tubing will spring back to its original shape.
Liquiflex Tubing vs. Polyethylene/LLDPEPolyethylene tubing’s durability and low cost have made it a popular choice for many applications. Freelin-Wade’s linear low density polyethylene (LLDPE) is highly flexible, but it’s nothing like what Liquiflex can do. Variation options for Liquiflex includes coiling (it’s memory makes it excellent for coiled tube) and may be bonded to form multi-tube bundles.
Poly-vinyl Chloride (PVC) is possibly the most versatile product from the chemical industry. It's used extensively in construction from siding, to wire insulation, to window frames to pipe. With the addition of a plasticizer, the compound becomes quite flexible and an excellent material for clear tubing. Pharmaceutical manufacturers, food and beverage manufacturers and medical device manufacturers all rely on clear PVC flexible tubing for its efficiency, cleanliness, and longevity. Freelin-Wade's flexible PVC uses a non-DEHP, non-phthalate plasticizer. We pioneered the use of this bio-based and environmentally conscious plastic tubing material.
Clear PVC Tubing
Freelin-Wade’s non-reinforced clear PVC tubing is manufactured using a safe, non-phthalate plasticizer. We pioneered the use of this environmentally-friendly material in the plastic tubing industry. Our clear PVC tubing features a smooth interior and exterior surface that prevents sediment accumulation and resists bacterial growth. It is FDA-approved for food contact, Cal Prop 65 compliant, and meets USPVI testing requirements. This makes our vinyl tubing ideal for food and beverage, medical, pharmaceutical, and other clean-critical industries.
Reinforced PVC Tubing
Freelin-Wade’s reinforced PVC tubing features an open-weave inner braid, making it tough enough for applications with working pressures up to 250 psi. The smooth-bore, full-flow I.D. dimensions are sized to fit standard commercial barbed fittings. Our reinforced tube is crystal clear for easy monitoring of fluid flow. It has a smooth inner and outer surface that prevents sediment accumulation, and is bacteria and pathogen resistant. This makes it an ideal tubing solution for pharmaceutical, medical, food and beverage, and other clean-critical applications.
Our PVC Tubing Features and BenefitsFreelin-Wade's flexible PVC uses a non-DEHP, non-phthalate plasticizer. We pioneered the use of this bio-based and socially conscious material in the plastic tubing industry years ago. Freelin-Wade’s PVC has a smooth interior and exterior which prevents sediment accumulation, making it well-suited for the food & beverage, medical and pharmaceutical industries.
Coiled tubing and hoses are the right choice for a wide range of applications. At Freelin-Wade, our catalog includes a complete selection of coiled hoses and tubes.
Coiled Hoses
Coiled hoses feature reinforcement, which is a braided thread embedded in the walls of the hose, and reusable fittings. Coiled hoses are useful for a wide range of applications, including impact wrenches, air tools, blow guns and more.
Coiled Tubing
Unlike coiled hoses, tubing does not feature reinforcement or fittings. Choose tubing if you prefer to assemble a hose according to your own specifications, or if you need tubing for a large assembly. Use push-to-connect or standard fittings with coiled tubing.
If your requirements call for higher pressure, chemical resistance or something more unique, our specialty plastic tubing options have you covered. Freelin-Wade manufacturers a variety of plastic tubing options including FEP, Kynar®, Weld Spatter Resistant, Static Dissipative and Multi-Bore products. We also manufacture our innovative and industry leading Multi-Color Ribbon Tubing (MCR). In addition to our in-stock plastic tubing options, Freelin-Wade engineers are happy to work with you to create exactly the right tubing for your specifications.
Kynar® Tubing
Kynar® PVDF compound is an economical alternative to Teflon®, (PTFE, PFA, and FEP) tubing for applications not requiring heat resistance. Kynar possesses excellent resistance to a wide range of chemicals. The high purity material is the ideal tubing for a variety of usages requiring an odorless and tasteless tube.There are multiple grades of Kynar resins available. Some of these are used in rigid pipe usage. Freelin-Wade uses the most flexible grade available.
FEP Plastic Tubing
When you’re looking for a combination of high heat resistance, chemical resistance and affordability, Fluorinated Ethylene Propylene (FEP) is a smart option that offers all three of these features and more. FEP tubing from Freelin-Wade is available in a wide variety of packaged lengths. It is a solid alternative to Teflon tubing and can be made into self-retracting coils.
Jacketed Tubing and Bundles
Freelin-Wade's Jacketed Tubing and Bundles are an excellent way to color code a pneumatic systems in a neat, flexible package. Save time over spiral wrapping or tie wrapping your flexible tubing with this jacketed bundling method. Ask about our variety of variation possibilities. These include bundling wire, different tube sizes, tube materials, colors and coiling. Jacketing is also available as a variation. Every day we customize tubing bundles for our customers with jackets using a variety of materials. In addition, Freelin-Wade has developed a new process where we can jacket much longer lengths. No one else has this technology. It speeds up the process and will save you money. In fact, it opens up jacketing to new markets and possibilities. If you think that jacketing is something that would benefit you, give us a call. You'll be surprised to learn what all is possible and how cost-effective it is. Of course because it's Freelin-Wade flexible tubing, you know it will fit and arrive on time, every time. Worry-free plastic tubing.
Spatter Guard SRT
Spatter Guard SRT (Spatter Resistant Tubing) is made from a 94V0 polyurethane resin that has been specifically formulated to resist against weld spatter without the need of an outer jacket. While this new tubing can be used in any application where you are currently using the jacketed version, it has a higher working pressure making it even better suited for industrial applications.
Weld Spatter Resistant Tubing - Jacketed for Superior Protection
No matter how diligent your facility and employees are about preventing weld spatter, it inevitably happens occasionally. Weld spatter can be very harmful to tubing. Fortunately, Freelin-Wade manufactures tubing that features a weld spatter-resistant jacket that protects the polyurethane tubing inside. The cover is approximately .030" thick and does not adhere to the inner tube, allowing the jacket to be easily skived back for fitting connection with conventional compression, barb or push-in fittings.
Silcryn™
Do you need an economical tube or cable jacket solution that has low surface friction, strong tear resistance, and looks good too? May be you’ve looked at silicone- but find it too expensive! May be you’ve tried Tygon – but it’s too tacky! You have even looked at latex, only to discover you need something latex-free. We have your solution - Silcryn™. Freelin-Wade engineers spent two years working closely with our resin suppliers to develop Silcryn™, initially as a solution for the dental industry. Over time, our customers have discovered its supple, satiny finish is great for medical and industrial applications as well. They not only love how it glides against other tubes and surfaces, but its velvety matte finish looks as good as it performs. Silcryn™ works great for dental handpiece tubing, medical tubing, wire cable jacketing, and industrial jacketing. But really, its only limitation is your imagination!
Plastic Extruded & Co-Extruded Tubing
Freelin-Wade designs and manufactures extruded plastic tubing for a variety of industries including dental, medical, food service, and more. We also carry more than 4000 stock extruded plastic tubing products that you can buy online.
Formed Plastic Tubing
Plastic tubing can be bended and formed into virtually any shape including coiled/spiraled, curved and angled shapes. Formed plastic tubing can eliminate problems such as kinking and often makes installation easier and more professional looking. Unlike flexible plastic tubing, formed plastic tubing retains its shape, making it ideal for piping, diagnostics equipment, wiring and any other application where space constraints are a concern.
Customized Flexible Plastic Tubing
Made from molten polymer plastic fed through a customized die, custom plastic tubing is used in many different industries including medical, food and beverage, automotive and construction. Plastic tubing can also be useful for home projects. While standard plastic tubing comes in pre-made dimensions and shapes, custom tubing provides greater utility. By customizing the material, size, and profile, plastic tubes become more efficient, cost-effective, and versatile.
Plastic Tubing Prototypes
You are building your machine from scratch. Your team analyzed the problems and prototyped solutions. Some ideas will work and some won’t... you'll never know until you try. We know the process and that’s why we make hundreds of prototypes every month for people just like you. Getting your application, and all of the parts working together is what we are all about. That's why we don't have a minimum order quantity. Give us a call or click the Contact Us link at the top of the page. You'll find us to be easy to work with and at least the tubing part of your machine, will be totally worry-free.
JOHN GUEST
Linear Low Density Polyethylene Tubing (LLDPE)
The John Guest polyethylene range of plastic tubing is produced in Linear Low Density Polyethylene for cold and intermittent hot water applications. John Guest tubing provides the benefits of a wide range of temperature and pressure suitability, broad chemical compatibility and is made from non-contaminating materials. Common applications are in water purification, water conditioners, ice makers and misting systems. LLDPE tubing is more robust than traditional low or medium density polyethylene and is recommended for use with cold and intermittent hot water. John Guest LLDPE tubing is made from FDA approved materials and is NSF International a Standard 51 and 61 certified. John Guest Polyethylene tubing is designed for use with John Guest Super Speedfit Push-Fit Fittings and John Guest Shut-Off Valves.
NEWAGE
FLEXIBLE PVC TUBING AND HOSE - RIGID PVC PIPE
Although no plastic tubing product can universally handle all applications, the PVC family of products offered by NewAge® Industries covers one of the widest ranges of applications serviced by any one type of plastic material. Flexible PVC tubing offers a broad range of chemical and corrosion resistance, excellent abrasion and wear resistance, rubber-like flexibility, visual contact with the flow (clear pvc tubing and hose styles), and outstanding flow characteristics. These features, along with various construction options offered (wire or braid reinforcement, rigid pipe, unreinforced) and the different formulations available (fuel and oil, 3A, FDA, NSF listed), make PVC attractive for so many applications. These include general industrial, food and beverage, potable water lines, pharmaceutical and medical, chemicals, fuels, oils, and mechanical applications including protective coverings and insulation sleeving.
Stocked PVC products are supplemented with the capability to have a product custom made to fit your exact requirements. Most of NewAge Industries’ PVC tubing can be produced in custom sizes, colors, and shapes, and can be cut, printed, or thermally bonded.
POLYURETHANE TUBING AND HOSE (PUR or PU Tubing and Hose)
Polyurethane combines the best properties of both plastic and rubber. It offers abrasion and tear resistance, high tensile and elongation values, and low compression set. Polyurethane is naturally flexible and exhibits virtually unlimited flexural abilities. Combining good chemical resistance with excellent weathering characteristics sets polyurethane apart from most other thermoplastics. It has exceptional resistance to most gasolines, oils, kerosene, and other petroleum-based chemicals, making PU tubing and hose, also know as PUR tubing and hose, an ideal choice for fuel lines (although additives in today’s gasoline and petroleum products warrant field testing). The two basic formulations of urethane, ester and ether, have some important differences. Water attacks ester-based urethane, causing a significant reduction in physical properties. Ether urethanes exhibit far superior hydrolytic stability, especially in humid environments. Ether-based materials also resist fungus growth better than ester-based materials.
NYLON TUBING
Nylon has been recognized as a rugged engineering plastic since its development by E. I. DuPont in the 1930s. Aimed as a substitute for metal, nylon’s light weight and corrosion and abrasion resistance have made it an attractive design choice. NewAge® Industries’ NYLOTUBE® is offered in the nylon-12 formulation and is typically used in various industrial applications. Nylon’s elastic memory is exceptional and can withstand repeated flexing over a long period of time without fatigue or fracture. This makes it a popular choice for retractable coils. NYLOTUBE also offers high-impact resistance, even at subfreezing temperatures, and low moisture absorption to minimize dimensional instability.
POLYETHYLENE TUBING (PE Tubing)
Polyethylene (PE) has long been recognized as an engineering plastic that exhibits a high degree of inertness, making it attractive for use in markets such as food and beverage, laboratories, and chemical processing where leaching or permeability would present risks. Polyethylene is also one of the lower-cost plastic materials and satisfies many requirements that call for inexpensive, lightweight tubing. In fact NewAge® Industries’ polyethylene tubing is so lightweight, it floats. PE tubing handles a wide variety of applications ranging from potable water feed or drain lines to pneumatic or signal lines used in instrumentation. ZELITE™, NewAge’s brand of LLDPE tubing, is offered in a linear low density polyethylene formulation for repeated flexing with little or no signs of wear and for improved stress crack resistance (over low density material). The resin is non-toxic, 100% virgin grade conforming to FDA requirements. ZELITE is a standard in the food and beverage processing and pneumatic industries, and its semi-rigid nature allows it to be used with push-to-connect fittings without clamps. Polyethylene-lined EVA tubing (PE-LINED EVA) is a co-extruded product. The inner core of polyethylene is extruded first, then farther down the production line, EVA is extruded around the inner core. PE-LINED EVA is typically applied where different performance requirements for the inside and the outside of the tube are needed (purity inside, flexibility outside).
POLYPROPYLENE TUBING (PP Tubing)
Polypropylene is the lightest of all thermoplastics available today, and like polyethylene, it will float. Other product features are excellent dimensional stability and electrical properties, good surface hardness and chemical resistance, and easy coloration. The combination of polypropylene’s properties makes it desirable for a broad mix of applications. In many areas where fluoropolymer tubing is typically used, polypropylene tubing can be employed as a relatively low-cost alternative. The high-crystalline composition also makes it good for use in structural systems. Polypropylene (PP) tubing is weldable and, when welded, can be used in non-fluid transfer applications.
HYTREL® TUBING
At NewAge® Industries, application specifics often lead the way to tubing and hose developments. Performance needs are researched, and characteristics that are specially suited to meet certain tubing and hose requirements are produced. While Hytrel-lined PVC may not have as broad an appeal as our standard stock products, it is frequently required for particular applications. Hytrel-lined PVC is a co-extruded tubing. The inner liner of Hytrel is extruded first, then farther down the production line, the outer cover of PVC is extruded around the inner liner. This product is typically applied where different performance requirements for the inside and the outside of the tube are needed. For instance, the oil resistance of Hytrel may be needed for an application in a harsh environment, where the durability of PVC is well suited.
FLUOROPOLYMER TUBING & HOSE - PTFE, FEP, PFA
Fluoropolymers are some of the most versatile engineering materials known and, since their discovery over 70 years ago, have been used in nearly every field of modern industry, technology, and science. Their non-stick properties became commonly recognized by the consuming public when E. I. DuPont began marketing his “Teflon™” brand product for use on cookware, as a fiber treatment for stain resistance, and in other household applications. Fluoropolymer material is recognized for its excellent resistance to heat — up to 500°F continuously. Lesser known is its usefulness in extremely cold temperatures. It will remain reasonably flexible to -100°F. Because fluoropolymers are almost universally inert to industrial chemicals and solvents, their use for corrosion protection has become one of their largest growth areas. With few exceptions, fluoropolymer tubing can handle virtually any corrosive chemical in use today.
TPR TUBING AND HOSE
Thermoplastic rubber (TPR) combines the processability of plastics with the flexibility and durability of rubbers. Typically more light weight and formable than rubber, TPR has been growing in acceptance for many usages over the last decade. TPR provides outstanding compression characteristics, making it an ideal peristaltic pump tubing. The material also offers excellent resistance to flex fatigue and tear. It maintains good flexibility to temperatures approaching -80°F. NewAge® Industries offers TPR in two grades to meet specific usages. The natural color FDA material is suitable for most clean needs, such as food and beverage or pharmaceuticals. Black-colored industrial grade formulation offers exceptional resistance to U.V., ozone, and other chemicals. It is well suited for outdoor use.
VITON™ TUBING
Known for its resistance to oils and chemicals, this remarkable material retains its good mechanical and chemical resistance properties at extremely high temperatures better than any other known elastomer. Viton is also a standout material in its resistance to weather-related aging and ozone. In fact, samples weathered in direct Florida sunlight showed little or no change in properties or appearance after 13 years of exposure. Viton’s fluid resistance far exceeds that of most other synthetic rubbers. It is resistant to hydrocarbons such as benzene, carbon tetrachloride, toluene, and xylene — fluids that normally act as solvents on rubber, disintegrating the material; leading to tubing failure. Engineers looking for exceptional resistance to petroleum-based fuels, oils, lubricants, and mineral acids at elevated temperatures will often turn to Viton, because most other thermoplastics cannot meet the necessary resistance levels.
SILICONE TUBING AND SILICONE HOSE
NewAge® Industries offers a broad line of tubing and hose products made from this versatile material, including platinum cured silcone tubing and silicone hose to ensure the least possible extractables. Our state-of-the-art, clean room is designed for manufacturing products particularly suited to medical and pharmaceutical applications. Also, our industrial grades offer exceptional performance at relatively lower costs. Silicone tubing has long been used for medical tubing, as it meets the medical industry’s requirements for cleanliness and non-toxicity. Another of silicone’s major features — resistance to extreme temperature variations — has enabled its use in applications where a flexible tubing is needed to handle temperatures not possible with other plastics or rubbers. A rubber-like thermoset material, silicone tubing and hose is extremely pliable and elastic, and it is not altered by the effects of weather. It generally exhibits inertness toward U.V., radiation, and ozone making it an excellent choice for electrically-associated applications.
LATEX TUBING
Latex natural rubber tubing has been used extensively in the health care industry for many years. From there it has expanded into the food, toy, instrumentation, and sporting goods fields. Known for its extreme flexibility, latex is among the most flexible and elastic rubber materials in use today. Resiliency is another quality of latex tubing, allowing it to maintain memory after repeated bending, stretching, or pulsating forces. Latex also withstands repeated sterilization with either steam, Ethylene Oxide, or gamma radiation. There are no added plasticizers, coagulants, or fillers to migrate and contaminate the stream or cause tube hardening. NewAge® Industries’ latex tubing is processed from pure, liquid, natural latex and is made using a unique dip method. This produces a tubing that is seamless, uniform, and very smooth, providing maximum flow and minimizing the possibility of encrustation during use.
NewAge Food and Beverage Hose
Beer and Wine Beverage Grade Butyl Hose and Food and Dairy Beverage Grade Nitrile Hose. ADI FreeNewAge Industries offers tubing and hose transfer solutions for the food and beverage industry. Both our Butyl and Nitrile Hoses contain pure, smooth liners to allow unrestricted flow, minimizing concerns associated with entrapment and blockage. Both meet FDA standards and contain microbe- resistant liners that will not impart taste or odor. Our Butyl Hose, constructed with a high purity white chlorobutyl rubber liner, is ideal for non-oily beverage and food applications including potable water, beer, wine and juices. Our Nitrile Hose, made with a high purity white nitrile rubber liner, is suitable for a wide variety of food and beverage applications including potable water, non-alcoholic beverages, juices, oily/fatty or dry bulk foods, milk, and dairy products. Both hoses are rated for full vacuum (29.9 in./Hg) and contain a stainless steel wire helix for reinforcement, making them ideal for suction and discharge applications. Crimping services are also available, enabling us to provide complete hose assemblies.
PARKER
MicroWeld™ Flame Resistant Tubing - 95FR Series
95FR Series Weld Spatter Resistant Tubing is an ideal option for low to medium pressure air and water supply lines where weld spatter protection is required.
Nylon Air Brake Tubing
Parflex makes enough air brake tubing in one year to circle the globe. Parflex's 1120 Air Brake Tubing provides excellent kink resistance for tight routings. This means reduced, and or, eliminated kinked lines resulting in less rework at installation.
Polyurethane PU Tubing
Polyurethane's 3 specific materials - ether, ester and food-grade "crystal" - offer excellent flexibility and outstanding use in a wide range of usages, allowing for up to 50% space reduction when compared to semi-rigid PA tubing.
Polyamide (PA) Flexible Tubing
Tried-and-tested for industrial or vehicle applications, PA tubing guarantees excellent durability due to its stable long-term mechanical properties. Special grade of semi-rigid polyamide manufactured according to our Eco-Design approach.
Polyethylene Instrument Grade Tubing - E/EB Series
Linear Low Density Polyethylene (LLDPE) tubing is made from 100% virgin resin material for water, food, beverages and food grade applications.
Flexible Polyurethane Tubing - U/UM Series
Polyurethane tubing offers the greatest flexibility and kink resistance along with exceptional abrasion resistance of any rubber or thermoplastic tubing.
Flexible Nylon Tubing - N Series
Flexible Nylon Tubing - N Series is formulated from abrasion-resistant, heat and light-stabilized nylon that is capable of operating at 200°F. It exhibits low-level water absorption and is chemically resistant.
Polyamide (PA) Multi Tubing
Our range of multi-tubing combines high quality performance and space optimisation in complex pneumatic circuits. Many possible configurations are available, depending on the pressure, temperature, flexibility and compatibility requirements.
Nylon Air Hose - Fast-Stor® Series
Parker Nylon Air Hose (Fast-Stor®) is a pneumatic hose coil manufactured from tough, abrasion-resistant nylon with superior memory characteristic. This hose coil was designed for pneumatic applications, such as construction and industrial automation.
Polypropylene Tubing – Laboratory Grade - PP And PPB Series
Parker Polypropylene Tubing meets FDA and NSF Standard 51 for food contact plastics. Polypropylene Tubing exhibits excellent chemical resistance to chlorinated water.
Polyurethane (PU) Recoil Tubing
This polyurethane recoil tubing is perfect for installations requiring flexibility in confined spaces. Good resistance to shock and abrasion, together with a design integrating straight ends, allow for easy and safe operation of pneumatic equipment.
Truck Coils, BRAKCOIL®
BRAKCOIL® tractor trailer coiled air hoses connect the service line and the emergency line between the tractor and trailer.
Anti-Spark Polyurethane (PU) Tubing
Combining outstanding spark resistance with superb flexibility, this range is perfectly suited for welding. Two types of PU - ether with PVC sheath or single layer ether.
Coiled Air Hose - NoMar™ Fast-Stor®
Parker’s NoMar™ Fast-Stor® Coiled Air Hose is manufactured from a durable, abrasion-resistant transparent blue polyurethane. It has a long service life in various rugged and heavy-duty industrial pneumatic applications.
Clear Vinyl Tubing – Series PV
Parker Clear Vinyl Tubing is a DEHP-free PVC tubing. It is one of the most economical FDA compliant tubing Parker manufactures. It features exceptional purity, clarity and flexibility.
High Durometer Polyurethane Tubing - HU/HUM Series
High Durometer Polyurethane Tubing has a greater burst pressure than standard polyurethane tubing.
Fireproof High Resistance Polyamide (PA) Tubing
This fireproof tubing combines excellent resistance to pressure, temperature, flame, and guarantees non-toxic smoke resulting from burn-off. The tubing eliminates the need for a stripping tool, thus preventing the risk of tube damage prior to connection.
Polyamide (PA) Recoil Tubing
Parker Legris recoil tubing has a lasting memory after multiple uses, offering an alternative to reels for excellent ergonomics and space saving. The pre-assembled tubes are equipped with a protection spring, preventing damage to the ends.
Polyethylene (PE) Tubing
Parker Legris offers two types of polyethylene tubing: "Advanced PE" 50% reticulated and Low Density PE. Our range of "Advanced PE" is designed for demanding environments, especially that of water treatment, without compromising operator safety.
Antistatic Polyurethane (PU) Tubing
With a constant 10² Ω.m resistivity across the entire thickness of the tubing wall, this tubing guarantees perfect dissipation of accumulated static electricity, thereby increasing safety.
NEXCLEAR® PVC Clear General Service Tubing, Series 100
Nexclear PVC Clear General Service Tubing is designed for transfer of abrasives, air, beverages, food particulates, sanitary products and potable water up to 150°F and 65 psi, Series 100
Nylon Pure Air Tubing - PAT Series
PAT Series Tubing features exceptional cleanliness properties and superior chemical and UV light resistance, allowing it to be the optimal tubing choice for pure air and gas distribution systems.
Anti-Spark Polyamide (PA) Tubing With PVC Sheath
A range of flame and spark-resistant polyamide tubing with superior resistance to impact and abrasion, improving equipment durability, particularly in areas subject to weld spatter.
High Strength Semi-Rigid Nylon Tubing - NR Series
High Strength Semi-Rigid Nylon Tubing features low moisture absorption and better chemical resistance than Series N Nylon Tubing.
High Density Polyethylene Tubing – HDPE Tubing
High Density Polyethylene (HDPE) Tubing is a durable and economical system solution for low-pressure pneumatics or fluid handling. The high strength tubing is manufactured from a high density linear polyethylene material.
PU Tubing - Series HUMCE
Parker HUMCE series PU tubing is perfect for pneumatics. It is allowed for up to 50% space reduction when comparing to semi-rigid PA tubing.
Spark Resistant Polyethylene Tubing - PEFR Series
PEFR Series Polyethylene Tubing is flame resistant (UL 94 V-2) and excellent for pneumatic controls in HVAC. Its resistance to stress cracking exceeds that of ordinary polyethylene tubing as measured by ASTM D-1693 (10% IGEPAL).
Diesel Fuel Tubing - HTFL & PFT Series
Parker's Nylon Diesel Fuel Tubing is heat and light stabilized, quality controlled and pressure tested for superior performance. Series PFT is compatible with JP-5 (MIL-DTL-5624) and JP-8 (MIL-DTL-83133).
High Strength Semi-Rigid Nylon Tubing - NTNA Series
NTNA Series Semi-Rigid Nylon Tubing features exceptional chemical resistance, offers a rugged construction and is NSF-51 certified for use in instrumentation lines, lubrication systems, process piping systems and refrigerant lines.
NEXCOL™ PVC High Stability Grade Aeration Tubing, Series 106 HSG
Nexcol PVC High Stability Grade Aeration Tubing is designed for air charging/circulation in underwater up to 140°F and 60 psi, Series 106 HSG
NEXVA™ EVA General Service Tubing, Series 440
Nexva EVA General Service Tubing is designed for transfer of abrasives, anhydrous ammonia, chemicals, herbicides, insecticides, water and various media up to 125°F and 125 psi, Series 440
Truck Coils, Fifth Wheel Slider
A Parker Fifth Wheel Slider Coil is a universal slider coil for a tractor-to-trailer connections.
NEXVA™ EVA General Service Tubing, Series 439
Nexva EVA General Service Tubing is designed for transfer of abrasives, anhydrous ammonia, chemicals, herbicides, insecticides, water and various media in applications to 125°F and 125 psi, Series 439
NEXCOL™ PVC General Service Tubing, Series 106
Nexcol PVC General Service Tubing is designed for transfer of air, water and various media up to 150°F and 65 psi, Series 106
Polyurethane (PU) Ether Tubing, Extruded In ISO 7 Clean Room For Life Sciences & Clean Rooms
This range of Polyurethane (PU) tubing, which meets rigourous technical requirements and is also bio-compatible, sterilisable and certified ISO 15001, has been specifically designed for use in medical devices or clean room applications.
Signal Call Tubing, Series 39521
Signal Call Tubing is designed to transfer air as part of a bell-ringer system for vehicle service stations in applications to 180°F and 25 psi, Series 39521
NEXPRIME™ PVC Fuel Grade Tubing, Series 115
Nexprime PVC Fuel Grade Tubing is designed for transfer of fuel in applications to 150°F and 65 psi, Series 115
Truck Coils, SliderCoil™
SliderCoil™ assemblies are used between an adjustable rear trailer axle and the final point on a trailer chassis.
NEXSYN™ EPDM/TPV General Service Tubing, Series 709
Nexsyn EPDM/TPV General Service Tubing is designed for transfer of air, mild chemicals, water and various media in applications to 180°F and 40 psi, Series 709
NEXSYN™ EPDM/TPV Tubing, Series 714
Nexsyn EPDM/TPV Tubing is designed for transfer of air, beverages, food, mild chemicals, sanitary products and potable water in applications to 180°F and 40 psi, Series 714
Temptube® - Preinsulated Tubing
Parflex Temptube® is thermally insulated and protected with a flexible, flame-resistant PVC jacket to provide an economical method for conveying steam and hot materials through a plant with minimal heat loss.
SL - Self-Regulating Temptrace™ Bundles For Low Temperature Maintenance
SL-Temptrace™ electric trace tubing bundles deliver freeze protection and provide low temperature maintenance for gases, liquids and other viscous materials in chemical processing and refinery applications.
Self-Regulating High Temperature Maintenance Bundles - SH-Temptrace™
Self-regulating Temptrace™ insulated tubing bundles provide freeze protection and high temperature maintenance for gases, liquids and other process materials.
Light Steam Trace Bundles - LT-Temptrace™
LT Temptrace™ bundles are designed with single or multiple process tubes, a thermal insulation for minimum heat loss and a flame-resistant jacket for added protection; ideal for simple instrument line freeze protection and viscosity maintenance.
Heavy Steam Trace Bundles - HT-Temptrace™
Parflex HT - Heavy Steam Trace Bundles are designed for use in pressure transmission applications and analyzer sample lines carrying heavy oils or distillates, gases or vapors.
CL-Constant Wattage Temptrace™ For Low Temperature Maintenance
CL Temptrace™ electric trace tubing is designed to maintain temperatures up to 250°F (121°C) and withstand internal exposure up to 400°F (204°C) for freeze protection, viscosity maintenance and low process temperature maintenance applications.
CH - Constant Wattage Temptrace™ For High Temperature Maintenance
CH - Temptrace™ electric heat trace tubing is intended for high temperature maintenance up to 400°F (204°C) in applications that involve analyzer, impulse and instrument lines, small diameter process lines, stack gas sampling lines and utility lines.
IS – Intermittent Steam Purge Bundles For Freeze Protection
Parflex IS - Intermittent Steam Purge Bundles are designed for freeze protection and periodic high-temperature steam purge.
Multitube® CS – Continuous Steam Purge Bundles
CS-Continuous Steam Purge Bundles for continuous, high-temperature steam purge up to 1100°F (593°C). Bundles are thermally insulated for freeze protection in operating environments with harsh conditions.
Multitube® Mineral Insulated Electric Trace Tubing For High Temperature Maintenance
Mineral Insulated Tubing is specially designed to maintain temperatures as high as 900°F (482°C) and withstand a maximum internal exposure of 1000°F (538°C) for various process control and analyzer systems applications.
Analyzer Bundles For Environmental Monitoring Systems
Analyzer Bundles for use in Continuous Emissions Monitoring Systems (CEMS) and probe control applications.
Multitube® Metal And Plastic Tubing Bundles
Multitube® Metal and Plastic Tubing Bundles save space, reduce installation costs and offer protection in various industrial plant, robotics and laboratory applications.
Nylon Air Brake Tubing
Parflex makes enough air brake tubing in one year to circle the globe. Parflex's 1120 Air Brake Tubing provides excellent kink resistance for tight routings. This means reduced, and or, eliminated kinked lines resulting in less rework at installation.
Polyamide (PA) Flexible Tubing
Tried-and-tested for industrial or vehicle applications, PA tubing guarantees excellent durability due to its stable long-term mechanical properties. Special grade of semi-rigid polyamide manufactured according to our Eco-Design approach.
Flexible Nylon Tubing - N Series
Flexible Nylon Tubing - N Series is formulated from abrasion-resistant, heat and light-stabilized nylon that is capable of operating at 200°F. It exhibits low-level water absorption and is chemically resistant.
Polyamide (PA) Multi Tubing
Our range of multi-tubing combines high quality performance and space optimisation in complex pneumatic circuits. Many possible configurations are available, depending on the pressure, temperature, flexibility and compatibility requirements.
Fireproof High Resistance Polyamide (PA) Tubing
This fireproof tubing combines excellent resistance to pressure, temperature, flame, and guarantees non-toxic smoke resulting from burn-off. The tubing eliminates the need for a stripping tool, thus preventing the risk of tube damage prior to connection.
Polyamide (PA) Recoil Tubing
Parker Legris recoil tubing has a lasting memory after multiple uses, offering an alternative to reels for excellent ergonomics and space saving. The pre-assembled tubes are equipped with a protection spring, preventing damage to the ends.
Nylon Pure Air Tubing - PAT Series
PAT Series Tubing features exceptional cleanliness properties and superior chemical and UV light resistance, allowing it to be the optimal tubing choice for pure air and gas distribution systems.
Anti-Spark Polyamide (PA) Tubing With PVC Sheath
A range of flame and spark-resistant polyamide tubing with superior resistance to impact and abrasion, improving equipment durability, particularly in areas subject to weld spatter.
High Strength Semi-Rigid Nylon Tubing - NR Series
High Strength Semi-Rigid Nylon Tubing features low moisture absorption and better chemical resistance than Series N Nylon Tubing.
High Strength Semi-Rigid Nylon Tubing - NTNA Series
NTNA Series Semi-Rigid Nylon Tubing features exceptional chemical resistance, offers a rugged construction and is NSF-51 certified for use in instrumentation lines, lubrication systems, process piping systems and refrigerant lines.
Fluoropolymer (FEP) Tubing
FEP (fluorinated ethylene propylene) tubing is a robust engineering fluoropolymer which provides excellent fluid visibility and is perfect for flow control monitoring.
PTFE Tubing – Industrial And Heavy Wall Tubing – Series 101/201
Chemical resistant PTFE tubing is a high temperature tubing operating up to 500°F/260°C. PTFE tubing offers the best chemical and corrosion resistance of all Parflex tubing and meets AMS 3653 requirements.
FEP Industrial, Heavy Wall & Metric Tubing - Series 103/203
FEP tubing is used when you need chemical resistant tubing and long continuous lengths or very clear fluoropolymer tubing. FEP tubing can be supplied in extrusion lengths exceeding 1,000 foot continuous when necessary.
PFA Tubing – Industrial And Heavy Wall – Series 104/204
When temperature and clarity are both factors, Parker's PFA tubing is the product of choice. PFA offers the high-temperature attributes of PTFE, long continuous lengths and almost as much clarity as FEP tubing.
Convoluted Tubing – Extra Flexible Tubing
Convoluted tubing is very flexible and is ideal for applications where a tighter bend radius, increased pressure handling or crush resistance is needed.
Fluoropolymer (PFA) Tubing
Parker Legris PFA tubing offers 10 times greater durability than other fluoropolymer tubings under severe chemical and mechanical conditions. This tubing range is available in three material grades, offering perfect compatibility with all applications.
PTFE Tubing For Electrical Insulation Applications - AWG & Fractional
PTFE AWG (American Wire Gauge) & Fractional Tubing is designed for electrical insulation applications that require high-temperature resistance (withstands soldering), chemical and abrasion resistance. Designs meet UL and CSA certifications.
PFA High Purity Tubing – Industrial And Heavy Wall – Series 105/205
High Purity PFA Tubing is manufactured for use in hostile environments where purity is critical. Testing has proven that a high purity PFA tube is able to withstand corrosive surfactants for longer periods of time than standard fluoropolymer tubing.
Corrugated Tubing -Tex-Flex® Series
Corrugated Tubing aids customers in tighter routing of tubing in applications with small bend radius requirements without kinking or reducing the inside diameter of the tube. The bend radius is almost 4x smaller than a smoothbore tube of the same size.
PTFE Spiral Cut Cable Wrap
PTFE Spiral wrap provides harnessing for wires and cable while allowing leads at various points.
MicroWeld™ Flame Resistant Tubing - 95FR Series
95FR Series Weld Spatter Resistant Tubing is an ideal option for low to medium pressure air and water supply lines where weld spatter protection is required.
Polyurethane PU Tubing
Polyurethane's 3 specific materials - ether, ester and food-grade "crystal" - offer excellent flexibility and outstanding use in a wide range of applications, allowing for up to 50% space reduction when compared to semi-rigid PA tubing.
Flexible Polyurethane Tubing - U/UM Series
Polyurethane tubing offers the greatest flexibility and kink resistance along with exceptional abrasion resistance of any rubber or thermoplastic tubing.
Polyurethane (PU) Recoil Tubing
This polyurethane recoil tubing is perfect for installations requiring flexibility in confined spaces. Good resistance to shock and abrasion, together with a design integrating straight ends, allow for easy and safe operation of pneumatic equipment.
Anti-Spark Polyurethane (PU) Tubing
Combining outstanding spark resistance with superb flexibility, this range is perfectly suited for welding applications. Two types of PU - ether with PVC sheath or single layer ether.
High Durometer Polyurethane Tubing - HU/HUM Series
High Durometer Polyurethane Tubing has a greater burst pressure than standard polyurethane tubing.
Antistatic Polyurethane (PU) Tubing
With a constant 10² Ω.m resistivity across the entire thickness of the tubing wall, this tubing guarantees perfect dissipation of accumulated static electricity, thereby increasing safety.
Polyurethane (PU) Ether Tubing, Extruded In ISO 7 Clean Room For Life Sciences & Clean Rooms
This range of Polyurethane (PU) tubing, which meets rigourous technical requirements and is also bio-compatible, sterilisable and certified ISO 15001, has been specifically designed for use in medical devices or clean room applications.
Polyethylene Instrument Grade Tubing - E/EB Series
Linear Low Density Polyethylene (LLDPE) tubing is made from 100% virgin resin material for water, food, beverages and food grade applications.
Polyethylene (PE) Tubing
Parker Legris offers two types of polyethylene tubing: "Advanced PE" 50% reticulated and Low Density PE. Our range of "Advanced PE" is designed for demanding environments, especially that of water treatment, without compromising operator safety.
High Density Polyethylene Tubing – HDPE Tubing
High Density Polyethylene (HDPE) Tubing is a durable and economical system solution for low-pressure pneumatics or fluid handling applications. The high strength tubing is manufactured from a high density linear polyethylene material.
Spark Resistant Polyethylene Tubing - PEFR Series
PEFR Series Polyethylene Tubing is flame resistant (UL 94 V-2) and excellent for pneumatic controls in HVAC applications. Its resistance to stress cracking exceeds that of ordinary polyethylene tubing as measured by ASTM D-1693 (10% IGEPAL).