Full Line Pneumatic Components


Full Line Pneumatic Components


metal work pneumatics
Full Line Pneumatic Components


Venturi Pumps, Accessories


VTCF Flat Suction Pads (round)

Universal suction pads in NBR or Silicone. Diameters from 3.5 to 95 mm with thread size M3, M5, G1/8, G1/4, both male and female.

VTOF Flat Suction Pads (Oval)

Flat suction pads in NBR or Silicone which, thanks to their oval shape, can be used to handle narrow and long workpieces. Diameters from 7x3,5 to 60x20 mm with thread size M3, M5, G1/8, G1/4, both male and female.

VTCL (1.5 folds) Bellows Suction Pads

VTCL bellows suction pads available in NBR or Silicone which allow an optimal damping when placed on the workpiece. Diameters from 11 to 53 mm with thread size M5, G1/8, G1/4, both male and female.

VTCN (2.5 folds) Bellows Suction Pads

VTCN bellows suction pads, available in NBR or Silicone, are suitable to handle uneven workpiece surfaces or workpiece major height differences. Diameters from 5 to 52 mm with thread size M5, G1/8, G1/4, both male and female.

VEB basic ejectors

Basic ejectors with no moving parts, based on the Venturi principle. Version "L" for porosive workpieces. Version "H" for high vacuum value.

VEBL basic ejectors

Basic ejectors in technopolymer without moving parts, based on the Venturi principle. Different sizes available, with internal nozzle from 0,5 to 2,5 mm and with suction rate from 8 to 207 l/min.

VED inline ejectors

Vacuum ejectors without moving parts, based on the Venturi principle, used for direct installation on suction pads.

VEDL inline ejectors

Vacuum compact ejectors in technopolymer without moving parts, based on the Venturi principle, used for direct installation on suction pads. Available in two sizes with internal nozzle of 0,5 and 0,7 mm and with suction rate from 8 to 16 l/min.

VEC compact ejectors

Vacuum generators with integrated valves and monitoring system. Possibility to command suction and blow-off individually without using external valves.

VEM compact ejectors

Miniaturized vacuum generators with integrated valves and monitoring system. Possibility to command suction and blow-off individually without using external valves.

Series FVD inline vacuum filters

For use in vacuum systems with minor to medium levels of dirt. Direct mounting on the suction pad.

Series FVT vacuum cup filters

Used as pre-filters and fine filters for air with varying amounts of contamination, for the protection of the vacuum generator. Mounted as protection for the ejector.

IAVB High vacuum valve

While maintaining the reliability of the conventional high vacuum valve, it has achieved pressure control that enables various processes.

Slow exhaust control is possible

Compared with general ON / OFF vacuum valves and two-stage exhaust vacuum valves, it enables gradual exhaust at a constant rate.

Pressure control function added

A pressure control function has been added to the highly reliable vacuum valve. Regulator and variable leak are not required for pressure adjustment in vacuum. The poppet valve system enables fully closed operation, a problem for butterfly valves, through the O-ring sealing structure.

Easy maintenance

The valves and wiring components can be maintained separately.

Various shapes and variations of materials are available. A wide range of variations that can support various workpieces and transport environments. (Pad shape) Standard, sponge, bellows, multi-stage bellows, oval, soft, soft bellows, anti-slip, thin object, flat, suction mark prevention

  • Highly reliable & easy to use
  • Air operated, NC single-acting or double-acting
  • Multiple sensor positions available
  • Orifice sizes from 17mm – 80mm
  • Flanged connections
  • Long life
    VBU Dual Bellows Suction Cups

    The VBU is particularly good for use on curved surface and for separating thin sheets of materials in stacks. The double bellows suction cup is very good at compensating for a degree of difference in level and curvatures of a work piece. The thin lip of the suction cup allows excellent holding of a product with uneven surfaces.

    Long Bellows Suctions Cups

    We have brought forward Long Bellows Suctions Cups to our valued customers, manufactured as per the industry laid parameters. These products are used often to handle fragile items and can increase the height. We carry out the whole manufacturing procedure based on stringent working principles and make sure that the outcome offers flawless performance. These products are offered to provide ensured level of vacuum applications.

    Flat Suction Cup

    We are considered to be one of the leading manufacturers and suppliers of this Flat Suction Cup. Manufactured as per the industry set norms and guidelines, its quality never deteriorates. Further, owing to the finest raw materials used in its making, the product is characterized by superior functionality, high sturdiness and commendable durability.


    Since 1972, Vaccon has supplied the global robotics, automation and process controls industries with rugged, reliable, and efficient vacuum products featuring low operating and maintenance costs. To ensure that the most efficient product is available for each application, Vaccon offers a line of standard vacuum pumps, air amplifiers and material conveying pumps available in a wide variety of sizes and body styles covering a broad range of performance levels. Vaccon’s extensive line of pumps are complemented by a large selection of vacuum cups available in many sizes and styles, vacuum gauges, vacuum sensors and switches, filters, silencers and manifolds.

    Venturi Vacuum Cartridges (C Series)
    Venturi Vacuum Pumps (VP, RTM & J Series)

    Venturi Vacuum Cartridges are used on Modular Venturi Vacuum Pumps. Stand-alone cartridges are used in field interchanges and are ideal in many OEM applications. Vaccon’s Venturi Vacuum Cartridges are the heart of the Modular Venturi Vacuum Pump. These cartridges are ideal for OEM’s requiring custom vacuum applications. Vaccon’s Venturi Vacuum Cartridges are available as Push-in, or Threaded types. Vaccon’s Threaded Venturi Vacuum Cartridges come in two types: OEM or RTM Series™. OEM cartridges are designed to fit into custom threaded OEM cavities, providing a proprietary vacuum source. They come in 23 different performance levels, standard with removable silencers and available with standard imperial or metric threads. The RTM Series threaded cartridges are designed replace clogged multi-stage cartridges. The RTM cartridges directly thread into multi-stage pumps, quickly replacing failed cartridges, saving time and money.

    Vacuum Valve Stacks (Vac-Stac & VP92 Series)

    Vaccon's air-powered venturi vacuum pumps are highly efficient, capable of reaching 28"Hg [948mbar], dirt tolerant, and include a silencer for quiet operation. Lightweight and compact, they can be easily mounted close to the vacuum point for fast response. All Mid Series pumps incorporate Vaccon’s interchangeable venturi cartridge system that allows designers to choose from 11 different cartridge assemblies to optimize pump performance to meet their specific application needs. By nature, vacuum pumps draw in the atmosphere in which they operate in. Any debris, dirt and/or dust in the air will be drawn through the pump. Whether your application is carton erecting, pet food bagging, sheet feeding, or any other application, Vaccon pumps operate continuously without maintenance or vacuum filters that can clog, degrade performance, cause downtime and increase costs.

    VDF Series Variable Flow Variable Vacuum Venturi Vacuum Pumps

    VP92 Max Series and Vac-Stac™ Series provide a quick and efficient way to add vacuum to valve stack bases. The VP92 and Vac-Stac products provide vacuum while simplifying the system by eliminating the need for additional pneumatic components and fittings. Please note that the VP92 and Vac-Stac products are not standalone pumps and must be used with a MAC 92 or ISO 5599/1 valve stack to operate. Vaccon’s Vac-Stac Series modular venturi vacuum pumps are designed specifically to integrate with ISO 5599/1 Size-1 directional control valves. Vaccon’s Vac-Stac pumps provide the quickest and most efficient way to incorporate vacuum with individual ISO valve bases or manifold assemblies. Vaccon’s VP92 Max Series Valve Controlled Venturi Vacuum pump is designed to integrate directly with MAC 92 Series Sub Bases. The VP92 venturi pump quickly plugs into a MAC 92 valve stack base providing vacuum.

    Variable Vacuum Pumps (VDF Series)

    The VDF Series is a unique Vaccon innovation that places the vacuum port and exhaust path inline making a straight-through venturi vacuum pump. These compact pumps offer high flow rates up to 120 SCFM [3400 LPM] and high vacuum levels up to 25”Hg [847mbar]. Developed for extremely dirty and dusty environments such as foundries, refractory and bagging operations, VDF pumps don’t clog, lose suction or require a vacuum filter. Standard VDF pumps are field-adjustable allowing you to regulate the vacuum flow and vacuum level to meet your application requirements. This maximizes energy efficiency by consuming only the compressed air necessary to do the job. A pressure regulator is not required as the pump can be tuned to operate at any pressure above 50 PSI [3.5 bar]. For applications requiring a fixed vacuum level, Vaccon offers preset and permanently locked VDF pumps at customer specified vacuum settings, 10-25”Hg [339-847mbar], “pinned” at the factory for consistent and tamper-proof operations.

    Adjustable Air Amplifiers / Blowers (CDF Series)

    Adjustable Air Amplifiers / Blowers (CDF Series) CDF Series Air Amplifiers / Blowers Vaccon Air Amplifiers easily and safely handle porous objects that many consider too challenging to handle with vacuum. Vaccon air amplifiers are field-adjustable to meet your process or product specifications. With its inline, straight through design – dirt and debris pass right through, there’s no clogging, no downtime. CDF Series for Air Blower Applications: High Output Flow The CDF Series vacuum pump efficiently generates a high vacuum flow and a high exhaust flow using a small amount of compressed air, with amplification ratios up to 40:1 (output to input). CDF's are ideal for applications that require high levels of flow such as the rapid evacuation of fumes, blow drying wet materials, or to cool hot areas and/or materials. CDF Series for Material Handling Applications: High Vacuum Flow CDF Series air amplifiers generate high vacuum flow, overcoming leaks inherent in handling porous objects such as cardboard, foam or fabric. CDF air amplifiers safely transfer irregularly shaped items, with or without a vacuum cup. Rigid cups, for use with the CDF Series are available specialty materials such as UHMW polyethylene, Teflon® and Delrin®. For chemical compatibility, heat and environmental requirements, food and medical applications, custom materials are available: stainless steel, Delrin®, Teflon®, PVC, and more. A solenoid valve may be incorporated for instant on/off control so that CDF’s operate only when air is needed.

    Material Conveying Pump (DF Series)

    The DF Series of high flow material conveying vacuum pumps provide a simple, reliable and cost effective method of in-line transfer of bulk materials, complex shapes, individual objects, selvedge. The DF pump's unique capability to create instantaneous vacuum flow and high air velocity, combined with its straight-through, smooth bore design allows material to pass directly through the pump at high speeds without interference or clogging. Simply regulate the input pressure to adjust and control the transfer speed. For maximum efficiency, the compact design allows close placement to the work area. DF Series material conveying pumps are made of anodized aluminum and available in 17 standard models with inside diameters from 1/8" [6mm] to 4" [100mm]. Sizing the correct DF material transfer pump should take into account the material density, particle size, transfer rate required (kg/min), elevation and length of transfer line. For application assistance, please contact Vaccon Technical Support, or download the DF Series Application Installation Examples for application examples and typical configurations. Customers can send product samples to Vaccon to test at our in-house test facility where we will size the correct DF pump and send a video of the results.

    Vacuum Cups & Fittings

    Vaccon offers a wide range of vacuum cup styles and sizes. Fittings in multiple styles are also available individually or as a cup assembly. Cups are available in various durometers, colors and materials. Depending on your application, sizing a vacuum cup and pump may require some trial and error. This is why Vaccon offers a 30 Day Test & Evaluation program. If you don’t have the time or resources to test products yourself, we recommend that you send us a sample of the product and we will size the cup and/or pump for you. With our in-house video studio, we can email short videos and/or digital photos of the product in action with the properly selected vacuum cup and pump.

    Vacuum accessories

    Vaccon offers a complete line of vacuum accessories and pneumatic accessories to complete and fully integrate any system design. Vaccon's complete line of stocked accessory items include silencers, in-line filters, vacuum gauges, vacuum check valves and electronic switches and sensors.

    Vaccon AA Series Silencers – closed end

  • Vacuum Pump Silencers
  • Vacuum Check Valves
  • Vacuum Gauges
  • In-Line Vacuum Filters
  • Switches and Sensors
  • Plenums / Grippers
  • End-of-Arm Tooling

    Vaccon’s End-of-Arm Tooling collection of products includes End-of-Arm Tools (EOAT) for collaborative robots, and a comprehensive suite of EOAT components. Vaccon’s modular End-of-Arm Tooling (EOAT) components offer everything you need to create a complete “wrist-down” EOAT for your material handling operations. In addition, Vaccon’s vacuum and EOAT experts will help you find solutions material handling problems for a wide range of industries and applications. Our engineering team will help design and build custom EOAT tools, redesign existing tools or rebuild existing systems to ensure safe part handling while extending the life of the robot. Vaccon has extensive experience developing and delivering EOAT solutions. Robots and robotic tooling help you increase productivity, improve product quality, and reduce costs. The right End-of-Arm Tools (EOAT) can improve both the flexibility and cost effectiveness by working with and complementing the robot.

    Vaccon has wide range of standard vacuum products to meet most any material handling, automation or process control application. When your needs cannot be met by one of our standard products, our experienced engineering staff will be happy to review your specific needs and requirements with you to design a custom solution. We can build many of our standard products in:

  • Alternative materials: Stainless Steel (303, 304, 316, 316L), Teflon®, PEEK, Delrin® (Acetal), PVC
  • Specific Performance Levels
  • Custom shapes and sizes
  • Custom threads and fittings
  • Special coatings
  • Robotic End-of-Arm Tools

    The right End-of-Arm Tools (EOAT) improves both the flexibility and cost effectiveness by working in harmony with the robot, increasing productivity, improving quality, and reducing costs. Work in reverse, design the EOAT before selecting the robot. A top support issue Vaccon assists customers with is EOATs that are too large for the robots. Robots are often purchased then the EOAT is designed, only to find out that the EOAT is too heavy for the robot to handle. Vaccon finds solutions for customer's material handling problems by creating new tools, redesigning existing tools or rebuilding systems to ensure safe part handling while extending the life of the robot. Vaccon has extensive experience developing and delivering EOAT solutions for a wide range of industries and applications. Vaccon will build a custom EOAT and test it using your product at our in-house Tech Center, usually within the same day. Contact Vaccon Engineering with your specific application requirements. Vaccon partners with A3 Assocication robotics manufacturers including Fanuc, Kuka, Nachi, Rethink Robotics and Soft Robotics.